Steam Boilers

Product Details:

RSR series Shell Type Reverse Flue IBR Certified Steam Boilers manufactured by us are compact, 3-pass, reverse flue shell type boilers designed & manufactured in conformance with IBR regulations. These boilers are available in steam output capacities ranging from 100 kg/hr to 3000 kg/hr. Standard boilers are designed for maximum working steam pressure of 10.5 kg/cm2, whereas special executions are made against specific enquiries for steam working pressure of 12.5, 15 or 17.5 kg/cm2.

RSR series boilers are quite compact, occupying less floor space as compared to conventional 3-pass boilers. These boilers are fitted with mono-bloc type European make burners, which are well suited to operate on conventional fuels such as light oil, heavy oil, natural gas. LPG or in dual-fuel options as per end user’s requirement.

Hinged front refractory doors facilitate maintenance and access to furnace and flue tubes. Fully automatic operation with field proven controls and safety in RSR series steam boilers render them ideal for wide applications such as for pharmaceutical, chemical and food industries, laundries and hospitals.

Available fuel options : Light oil, Natural gas, LPG or dual fuel options

Salient Features of the RSR – Oil/Gas Fired, 3 Pass Reverse Flue, Shell Type, Flue Tube Steam Boilers are

• Compact space saving reverse flue, three-pass, shell type steam boilers fitted with mono-bloc burners & standard boiler mountings
• Easy to maintain and operate as all parts are easily accessible due to hinged doors
• Ideally suited for steady steam demands permitting larger steam pressure variation
• RSR steam boilers are highly cost-effective substitution for old coil type boiler installations where conventional 3-pass shell boilers cannot be fitted

Specifications

Product Details:

RSR series Shell Type Reverse Flue IBR Certified Steam Boilers manufactured by us are compact, 3-pass, reverse flue shell type boilers designed & manufactured in conformance with IBR regulations. These boilers are available in steam output capacities ranging from 100 kg/hr to 3000 kg/hr. Standard boilers are designed for maximum working steam pressure of 10.5 kg/cm2, whereas special executions are made against specific enquiries for steam working pressure of 12.5, 15 or 17.5 kg/cm2.

RSR series boilers are quite compact, occupying less floor space as compared to conventional 3-pass boilers. These boilers are fitted with mono-bloc type European make burners, which are well suited to operate on conventional fuels such as light oil, heavy oil, natural gas. LPG or in dual-fuel options as per end user’s requirement.

Hinged front refractory doors facilitate maintenance and access to furnace and flue tubes. Fully automatic operation with field proven controls and safety in RSR series steam boilers render them ideal for wide applications such as for pharmaceutical, chemical and food industries, laundries and hospitals.

Available fuel options : Light oil, Natural gas, LPG or dual fuel options

Salient Features of the RSR – Oil/Gas Fired, 3 Pass Reverse Flue, Shell Type, Flue Tube Steam Boilers are

• Compact space saving reverse flue, three-pass, shell type steam boilers fitted with mono-bloc burners & standard boiler mountings
• Easy to maintain and operate as all parts are easily accessible due to hinged doors
• Ideally suited for steady steam demands permitting larger steam pressure variation
• RSR steam boilers are highly cost-effective substitution for old coil type boiler installations where conventional 3-pass shell boilers cannot be fitted

Specifications

Product Details:

The RSB series is a reverse flue, three pass, water tube design steam boiler. It gives quick steam output within 4 minutes from cold start. The combustion chamber and the smoke passages are accurately designed, which ensures that combustion occurs perfectly. It does not require any qualified boiler attendant. It is ideal for small and medium sized plants, where average steam pressure (10 Bar) is required. Units can also be designed for higher pressures. Salient Features of the RSB - Oil/Gas Fired, 3 Pass, Water Tube Coil Type Steam Boilers are Reverse flue design Single coil for easy maintenance Larger pipe diameters Improved efficiency Instant steam generation The RSB series is also available in horizontal designs, with options of imported burners. Complete skid mounted units can also be offered. The feed water tank, water softener and fuel tank are mounted on one skid. Units are manufactured in non-1BR designs upto 800 kgs/hr and in IBR certified models of 1000 kgs/hr and above. We also offer coil type steam boilers up to capacities of 3TPH with working pressures up to 32 kg/cm2. Custom built designs can be offered for higher pressures. Specifications Model Capacity (kg/hr) RSB 100 100 RSB 200 200 RSB 300 300 RSB 400 400 RSB 600 600 RSB 800 800 For all steam producing boilers, softened and treated feed water must be used to prevent deposition of hard salts on the inner heat transfer surfaces. This is specially important for once-through coil type designs, where small internal surface of boiler tubes get choked up quickly, causing boiler outage. Ion-exchange type simplex or duplex softeners and chemical dozers are offered by us as standard accessories to ensure regular supply of treated feed water & longer boiler availability. Another aspect of coil type once-through boilers is feeding of excess water (15 to 20%), necessary to avoid super-heating of steam & to help remove sediments. The output steam therefore carries higher moisture levels. In applications where near dry steam is needed, it is necessary to install steam separators and steam traps in the steam supply lines. A host of accessories, such as feed water tanks, fuel of service tanks, heavy fuel oil ring mains, steam separators, steam pressure reducing stations are available to facilitate correct and cost effective boiler installation.

Additional Information:

• Production Capacity: As per customer required
• Delivery Time: 6 to 8 weeks

Product Details:

The Solid Fuel Fired Shell Type Flue Tube Steam Boiler is a horizontal shell type integral furnace, flue tube, solid fuel fired steam boiler. Capacities available are from 500Kgs/hr upto 3 Tonnes/hr steam in single furnace design and upto 6 Tonnes/hr steam in double furnace design. Units are designed as per Indian Boiler Regulations. It can be used on various fuels such as coal, lignite, wood & bagasse pellets. Fluidized bed combustion system is supplied to burn fuels such as rice husk and saw dust. An induced draft fan is provided for proper combustion and balanced draft in the combustion chamber. High Thermal efficiency is achieved by using a large furnace, an efficient burning system and correct heat release rate between radiant and convective sections. Boilers are designed to ensure uniform distribution of thermal and mechanical stresses in heat transfer surfaces. Salient Features of the RSW - Solid Fuel Fired, 3 Pass, Shell Type, Flue Tube Steam Boilers are Minimum space required due to compact design Fast start-up, erection & commissioning Very easy to operate & maintain Low power consumption Hinged doors for easy inspection & maintenance of boiler

Additional Information:

• Production Capacity: as per customer requirement
• Delivery Time: 10 to 12 weeks

Product Details:

We manufacture a wide variety of Steam Boilers with different firing options like , oil, gas, solid and electrical. Our steam boilers are known for their ruggedness and reliability.

Product Details:

We design & manufacture various types of hot water generators. ASTRA is a sheel type, three pass, reverse flue design hot water generator, usually built in horizontal configuration.

The ASTRA has an internal water cooled furnace with 1ow heat release rate. It can be supplied with the rugged ROSS make burner or compact imported monobloc burner. The reverse flue design achieves higher efficiency & saves precious fuel.

Each ASTRA undergoes a complete firing test including a thorough check up of all electrical components & adjustment of burner for efficient combustion.

Salient Features of the ASTRA – Oil/Gas Fired, 3 Pass, Reverse Flue, Shell Type Hot Water Generators are

• Rugged design
• Hinged doors for simple cleaning & inspection
• Fully automatic operation
• Improved efficiency
• Easy to install & maintain

Fuel firing options include : Light oil, Heavy oil & Gas.
Available Heating Capacities : From 1,00,1000 Kcals/hr to 30,00,000 Kcals/hr.

The normal outlet hot water temperature available is up to 95°C. Higher capacities and higher temperature units can also be supplied against specific inquiries. High temperatures upto 130°C can be achieved in pressurized units.

Specifications